2019+ GM Work Truck Universal Rear Camera Kit – Commercial Camera
$269.00
Heavy duty commercial camera with Sony CCD sensor
OEM to commercial coax conversion harness-plug and play!
Coaxial wire harness with weather tight connectors (select length above)
Camera harness has factory ends for plug and play with your existing wiring.
1 year camera warranty
10′, 16′, 32′, 64′ cable lengths available.
Camera Specifications:
Sony Ultra CCD for a super clear image
OPTIONAL heated camera
Infra-red LED’s that will create a daytime like display even in complete darkness
150 degree view
700 TV lines of resolution
0 lux (no light required to operate)
Heavy cast casing, steel mounting bracket
Locking weather tight connector
Displays on factory radio display*
*Factory radio must be programmed for a back up camera from the factory or by a dealership.
**This is for a Work Truck only- Window sticker and/or VIN will show (WT).
QUESTIONS? Call 253-297-4570 8:00AM - 6:00 PM PACIFIC
FMVSS 111 compliant!
This is a plug and play camera kit that will allow you to replace your factory tailgate camera on a Sierra/Silverado 1500 Series Work Truck & select 2500/3500 HD trucks with this commercial camera – Plug and Play! Your truck must be prewired and programmed for a camera or this kit will not work. Please see the Applications tab for more information!
**This is for a Work Truck only- Window sticker and/or VIN will show (WT).
APPLICATIONS:
2019-2021 GMC® Sierra Work Truck**
2019-2021 Chevrolet® Silverado 1500 Work Truck**
2020-2023 GMC® Sierra 2500/3500 Work Truck**
2020-2023 Chevrolet® Silverado 2500/3500 Work Truck**
“Work Truck” with factory installed backup camera wiring and “IOR” RPO code. Contact your GM® dealer with your VIN number to determine that your VIN has the “WT” specification and the “IOR” RPO code. NOTE: RPO code list can be retrieved by scanning the QR code on the VIN plate in the driver doorjamb.
Also confirm that you have the 30 pin connector for the camera wiring at the back of the truck.
**This is for a Work Truck only- Window sticker and/or VIN will indicate (WT).
NOTE: In order for this kit to operate correctly, your truck must be programmed for a backup camera.
To check if the radio is programmed for a camera, place the vehicle in reverse and insure the radio display switches to either NO DISPLAY (black screen with a warning) or a functioning backup camera. If your truck DOES NOT switch over to either a blank screen or an active rear camera, your vehicle must be programmed at your GM dealership to turn on the backup camera. Purchase of this kit does not include programming of the factory radio.
EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA). Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01.  FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance. Â
| Video System | NTSC |
|---|---|
| Waterproof/Dustproof Level | IP 67 Camera |
| Night Vision | 0 Lux |
| Power Supply | 12 Volts |
| System Manufacturer | EVI Systems |
| Camera Resolution | 600 TVL |
| Parking Guidelines | N/A |
| Camera Orientation | Rear Facing |
| Fit Type | Universal fit |
| Connection | Factory Connector |
| Sensor Type | CCD |
| Viewing Angle | 150 Degrees |
| Warranty | 1 Year |
| Camera Type | Rear Camera, Utility Bed Camera Systems |
| Vehicle Category | Truck, Fleet Vehicle (i.e. cargo van) |
| Number of Cameras | 1 |
| Install Type | Relocating factory camera |
| Wiring Type | Factory Plug & Play |
| Camera Mount Location | Bracket Mount |
| For a monitor it uses | Your factory display |
| Radio Screen Size | Factory LCD |
| Make | Chevrolet, GMC |
| Model | Silverado, Sierra |
| Year | 2020,2021,2022,2023 |
Mount the camera anywhere! Versatile mount allows for surface mount in virtually any location.
Camera tilt is adjustable so the view can be adjusted to accommodate any view required!
Plug OEM adapter harness into the factory camera 30 pin harness under the truck.
Factory radio must be pre-programmed from the factory or a dealership for this camera kit to work.
PRODUCT WARRANTY: 1 YEAR
Our goal is to answer all of your questions in advance so your purchase and installation goes as smooth as possible. We want to help you choose the right product for your vehicle and your priorities.
Since most electronic products are not eligible for return and refund once installed, and those that are will incur a restocking fee, it is critical that you understand the features and limitations of the products you are considering.
Please call 253-297-4570 if you have any questions about the products you are considering before your purchase or for support after your purchase, and we will be happy to help!
Please also take time to visit our POLICIES PAGE for more information and to review our policies regarding your purchase.
You may also like…
Related products
