Kenwood’s CMOS-210 rear-view camera is an excellent safety accessory to add to your Kenwood or Kenwood Excelon video receiver. This camera gives you a bright, wide 130-degree horizontal by 101-degree vertical view of what’s behind your vehicle when you’re backing up.
The camera renders a detailed 310,000 pixel resolution color image, and its highly sensitive CMOS sensor helps to eliminate distortion caused by nearby light sources like headlights. Mount the camera on your vehicle’s rear bumper or license plate, route the wire through your car to your video receiver, and you’ll never back over a garbage can again. The 29-foot long cable and harness assembly fits in most vehicles and includes a composite video connector, so it’ll work with almost any video receiver.
|– Output Video||Wide-Angle Mirror Image (Rearview)|
|– Sensor||1/4 inch color CMOS sensor|
|– Angle of View – Horizontal||Approx. 130°C|
|– Angle of View – Vertical||Approx. 101°C|
|– Color Signal System||NTSC|
|– Illumination Range|
|– Operating Voltage||14.4V (9.0 – 16 V allowable)|
|– Current Consumption||Approx. 60mA|
|– Grounding System||Negative Ground Type|
|– Operational Temp Range||-30°C – +70°C|
|– Dimensions – Camera Unit||24mm (W) x 24mm (H) x 24.9mm (D)|
|– Dimensions – Power Cord||7.5M (24.6ft)|
© 2016 Advanced Digital Concepts
Best experienced with Chrome